# Post-Reboot Checklist

## Date: 2025-11-05
## Status: ✅ COMPLETED - All items verified and working!

This checklist guided verification of the touchpad and touchscreen functionality after rebooting with the new kernel that includes I2C HID ACPI support and CONFIG_PINCTRL_AMD.

## What Was Done

1. ✅ Enabled `CONFIG_I2C_HID_ACPI=m` in kernel configuration
2. ✅ Enabled `CONFIG_PINCTRL_AMD=y` in kernel configuration (CRITICAL for GPIO interrupts)
3. ✅ Rebuilt kernel with genkernel (full rebuild, multiple attempts)
4. ✅ New kernel installed to `/boot/vmlinuz-6.12.41-gentoo-x86_64`
5. ✅ Backup created (`.old` and `.backup-20251105` files)

**Note**: The final kernel rebuild was done WITHOUT `--no-mrproper`, which may have reset some kernel configurations. Bluetooth configuration may need to be verified/restored.

## After Reboot: Verification Steps

### 1. Check Kernel Version
```bash
uname -r
# Should show: 6.12.41-gentoo-x86_64
```

### 2. Verify PINCTRL_AMD is Built-In
```bash
zcat /proc/config.gz | grep PINCTRL_AMD
```

**Expected output**:
```
CONFIG_PINCTRL_AMD=y
```

This must show `=y` (built-in), not `=m`. If it shows "is not set", the touchpad/touchscreen won't work.

### 3. Verify i2c-hid-acpi Module Loaded
```bash
lsmod | grep i2c_hid
```

**Expected output**:
```
i2c_hid_acpi          16384  0
i2c_hid               32768  1 i2c_hid_acpi
```

If not loaded, try loading manually:
```bash
sudo modprobe i2c-hid-acpi
```

### 4. Check Input Devices
```bash
cat /proc/bus/input/devices | grep -A 5 -i "ELAN\|touchpad\|touchscreen"
```

Should show both:
- ELAN901C touchpad (or similar ELAN name)
- ELAN0678 touchscreen (or similar ELAN name)

If only TrackPoint is shown, PINCTRL_AMD is likely missing or driver binding failed.

### 5. Test Touchpad Functionality

**Basic tests**:
- [ ] Move cursor with one finger
- [ ] Scroll vertically with two fingers
- [ ] Scroll horizontally with two fingers
- [ ] Right-click with two-finger tap
- [ ] Palm rejection works (no accidental touches)

### 6. Test Touchscreen Functionality

**Basic tests**:
- [ ] Tap to click/select
- [ ] Drag to move/select
- [ ] Two-finger pinch to zoom (if supported by app)
- [ ] Touch accuracy across entire screen

### 7. Verify Bluetooth Still Works

**IMPORTANT**: The kernel was rebuilt without `--no-mrproper`, which may have reset bluetooth configs.

```bash
# Check if bluetooth is enabled in kernel
zcat /proc/config.gz | grep "CONFIG_BT="

# Check bluetooth service
systemctl status bluetooth
```

If bluetooth is broken, refer to bluetooth setup documentation in this folder.

### 8. If Module Didn't Load Automatically

Create auto-load configuration:
```bash
echo "i2c-hid-acpi" | sudo tee /etc/modules-load.d/i2c-hid.conf
```

Then reboot again to verify it auto-loads.

## Troubleshooting

### Touchpad/Touchscreen Not Working

1. **Check kernel messages**:
```bash
dmesg | grep -i "i2c.*hid\|elan"
```

2. **Verify devices on I2C bus**:
```bash
ls -la /sys/bus/i2c/devices/ | grep ELAN
```

3. **Check if module exists**:
```bash
find /lib/modules/$(uname -r) -name "*i2c*hid*.ko*"
```

4. **Verify kernel config**:
```bash
zcat /proc/config.gz | grep I2C_HID
```

Should show:
```
CONFIG_I2C_HID=m
CONFIG_I2C_HID_ACPI=m
```

### If Nothing Works

Boot into backup kernel:
- At GRUB menu, select "Advanced options"
- Choose kernel with `.old` suffix
- Report the issue with kernel logs

## Verification Results (Post-Reboot)

### ✅ All Checks Passed!

**Kernel Configuration Verified**:
- [x] ✅ CONFIG_PINCTRL_AMD=y (built-in, confirmed working)
- [x] ✅ CONFIG_I2C_HID_ACPI=m (module loads automatically)

**Hardware Detection**:
- [x] ✅ ELAN901C touchpad detected and functional
- [x] ✅ ELAN0678 touchscreen detected and functional
- [x] ✅ i2c-hid-acpi module loaded automatically

**Functionality Tests**:
- [x] ✅ Touchpad cursor movement
- [x] ✅ Multi-finger gestures (scroll, tap)
- [x] ✅ Touchscreen touch input
- [x] ✅ Touchscreen multitouch support

**Regression Testing**:
- [x] ✅ Bluetooth still working (hci0)
- [x] ✅ WiFi still working
- [x] ✅ All other system functions intact

## Next Steps After Verification

✅ **Completed**: Documentation updated in Claude.md, Touchpad-Touchscreen-Setup.md

**Remaining tasks**:
1. **Audio control script** - Create sound control utility for switching audio sources
2. **Ghostty terminal** - Install Wayland-native terminal emulator
3. **Continue with remaining tasks** - IoT tools, mobile dev setup

## Documentation Files

For detailed information, see:
- `Touchpad-Touchscreen-Setup.md` - Complete setup guide
- `Claude.md` - Current system state (updated ✅)
- `Session-Summary.md` - All achievements to date

---

**System fully operational!** 🚀